A. Pala Iyilici, R.R. Politi, G. Kursun, M. Erol F. Bakal, G. Öner, E. Çelik, “Photocatalytic degradation of cyanide in wastewater using new generated nano-thin film photocatalyst”, Surface and Coatings Technology, Accepted Proof, doi:10.1016/j.surfcoat.2014.12.032 (Accepted Manuscript)

S.Demirci, B. Öztürk, S. Yıldırım, F. Bakal, M. Erol, O. Sancakoglu, R. Yıgıt, E. Celık, T. Batar, “Synthesis and comparison of the photocatalytic activities of flame spray pyrolysis and sol-gel derived magnesium oxide nano-scale particles”, Materials Science in Semiconductor Processing, Accepted Manuscript.

Sutcu M., Alptekin H., Erdogmus E., Er Y., Gencel O. Characteristics of fired clay bricks with waste marble powder addition as building materials. Construction and Building Materials. (May 2015) 82: 1–8.

Sutcu M. Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks. Ceramics International (2015) 41 (2): 2819–2827.

T.Dikici, S. Yıldırım, M. Yurddaşkal, M. Erol, M.Toparlı, E. Celik, “A comparative study on the photocatalytic activities of microporous and nanoporous TiO 2 layers prepared by electrochemical anodization” Surface and Coatings Technology, 263 (2015) pp. 1-7.



Sutcu M., del Coz Diaz J.J., Alvarez Rabanal F.P., Gencel O., Akkurt S. "Thermal performance optimization of hollow clay bricks made up of paper waste". ENERGY AND BUILDINGS (June 2014) 75: 96–108.

Cay V.V., Sutcu M., Gencel O., Korkut T. "Neutron Radiation Tests about FeCr Slag and Natural Zeolite Loaded Brick Samples". SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS, Vol. 2014, Article ID 971490, 5 pages, 2014. doi:10.1155/2014/971490.

Gencel O., del Coz Diaz J.J., Sutcu M., Koksal F., Álvarez Rabanal F.P., Martinez Barrera G., Brostow W. "Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results". ENERGY AND BUILDINGS (February 2014) 70: 135–144.

Sütçü M., Akkurt S. Development of lightweight refractory insulating brick using recycled paper processing waste as alternative raw material. Afyon Kocatepe University Journal of Science and Engineering, 14 (2014) OZ5780 p:509−516.

Can, M; Yigit, MZ; Seintis, K; Karageorgopoulos, D; Demic, S; Icli, S; Giannetas, V; Fakis, M; Stathatos, E. “Synthesis of two tri-arylamine derivatives as sensitizers in dye-sensitized solar cells: Electron injection studies and photovoltaic characterization” SYNTHETIC METALS. 188 (77-85)  Feb 2014

Usluer, O; Demic, S; Kus, M; Ozel, F; Sariciftci, NS. “White organic light emitting diodes based on fluorene-carbazole dendrimers” JOURNAL OF LUMINESCENCE. 146  (6-10) Feb 2014

Dikici, T; Guzelaydin, AH; Toparli, M. “Formation and characterisation of nanoporous TiO2 layers on microroughened titanium surfaces by electrochemical anodisation” MICRO & NANO LETTERS.  9 (2) (144-148) Feb 2014 

Dikici, T; Erol, M; Toparli, M; Celik, E. “Characterization and photocatalytic properties of nanoporous titanium dioxide layer fabricated on pure titanium substrates by the anodic oxidation process” CERAMICS INTERNATIONAL. 40 (1) (1587-1591) Jan 2014.

Sayin S, Ozbek C., Okur S., M Yilmaz Preparation of the ferrocene-substituted 1,3-distal p-tert-butylcalix[4]arene based QCM sensors array and utilization of its gas-sensing affinities, Journal of Organometallic Chemistry

Can M., Havare AK., Aydın H., Yagmurcukardes N., Okur S., Electrical Properties of SAM Modified ITO Surface using Aromatic Small Molecules with Double Bond Carboxylic Acid Groups for OLED Applications , Applied Surface Science

Sas EB., Kurt M., Can M., Okur S., Icli S., Demic S., Structural investigation of a self–assembled monolayer material 5–[(3–methylphenyl)(phenyl) amino] isophthalic acid for organic light–emitting devices, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy



Gencel O., Sutcu M., Erdogmus E., Koc V., Cay V.V., Gok M.S. "Properties of bricks with waste ferrochromium slag and zeolite". JOURNAL OF CLEANER PRODUCTION (2013) 59: 111–119.

A.K. Havare, S. Okur, N.T. Yagmurcukardes, M. Can, H. Aydin, M. Sekere and S. Demic, " Electrical Characterizations of Schottky Diodes on ITO Modifed by Aromatic SAMs",  ACTA PHYSICA POLONICA A, 123/2, 456-559, (2013) 

M. Yaman, N. Yagmurcukardes, A.K. Havare, H. Aydin, K. Ocakoglu and S. Okur, "Interface Properties Using Self-Assembled Monolayer in Organic Electronic Devices", ACTA PHYSICA POLONICA A, 123/2, 459-561, (2013)

M.Ö.Seydibeyoğlu, M. Misra, A.Mohanty, J. Blaker, A. Bismarck, M.Kazemizadeh, “Green polyurethane nanocomposites from soy polyol and bacterial nanocellulose” Journal of Materials Science, 48, 2167-2175, 2013.

Altuncu, E., Ozturk S., Erdogan. G., Ustel, F., Turk, A., "Cutting-tool recycling process with the zinc-melt method for obtaining thermal-spray feedstock powder (WC-Co)", Materiali in tehnologije / Materials and technology, ,Vol. 471 ,pp. 115 - 118, 2013

Havare AK., Okur S., Yagmurcukardes NT., Can M., Aydin H., Seker M., Demıc S., Electrical Characterizations of Schottky Diodes on ITO Modified by Aromatic SAMs, Acta Physica Polonica, A. 123 (2)



A. K. Havare, M. Can; S. Demic, M. Kus and S. Icli, The performance of OLEDs based on sorbitol doped PEDOT:PSS, Synthetic Metals, 161 (23-24), 2734-2738, (2012).

Tavman, I. Krupa, I. Omastova, M. Sarikanat, M. Novak, I. Sever, K. Ozdemir, I. Seki, Y. Podhradska, S. Moskova, D. Erbay, E. Guner, F. “Effects of conductive graphite filler loading on physical properties of high-density polyethylene composite” Polymer Composites 33 (7) pp.1071-1076, (2012).

O. Culha, S. Sahin, I. Ozdemir, and M. Toparli. “Heat Treatment Effects on Mechanical Properties of Atmospheric Plasma Sprayed FexB Coatings on Al Substrate” Experimental Techniques, DOI: 10.1111/j.1747-1567.2011.00781.x

Ozdemir, I, Gode C, Yilmazer H, Callioglu, H. “The effect of extrusion and high-pressure torsion on the properties of Alumix-231” Mater Sci Eng A, 532, pp. 573-578, (2012). 

A.C. Karaoglanli, G.Erdogan, Y.Kahraman, A.Turk, F.Ustel, I.Ozdemir “Study of the microstructure and oxidation behavior of YSZ and YSZ/Al2O3 TBCs with HVOF bond coatings” Materiali in tehnologije / Materials and technology 46 (5) pp. 439-444, (2102).

A.Gurbuz, N.Onar, I.Ozdemir, A.C.Karaoglanli, E.Celik. “Structural, thermal and magnetic properties of barium-ferrite powders substituted with Mn, Cu or Co and X (X=Sr and Ni) prepared by the sol-gel method” Materiali in tehnologije / Materials and technology 46 (3), 305–310, (2012).

B. Dikici, I. Ozdemir. “FeB and FeB/h-BN Based Anti-Corrosive Composite Coatings for Aluminium Alloys” Anti-Corrosion Methods and Materials, Volume 59 (5), (2012).

Sutcu M., Akkurt S., Bayram A., Uluca U., “Production of anorthite refractory insulating firebrick from mixtures of clay and recycled paper waste with sawdust addition”, Ceramics International, Vol.38, Issue:2 (2012) 1033–1041.

M.Ö.Seydibeyoğlu, “A novel partially biobased PAN-lignin blend as a potential carbon fiber precursor”, Journal of Biomedicine and Biotechnology, ID598324, 1-8, 2012 (doi:10.1155/2012/598324)

M. Zaverl, M.Ö. Seydibeyoğlu, M. Misra, A. Mohanty, “Studies on recyclability of polyhydroxybutyrate-co-valerate bioplastic: Multiple melt processing and performance evaluations” Journal of Applied Polymer Science, 125, E324-E331, 2012, Special Issue: Biopolymers and Renewable Resourced Materials.



A. K. Havare, M. Can; S. Demic, S. Okur, M. Kus, H. Aydin, N. Yagmurcukardes and S. Tari, Modification of ITO surface using aromatic small molecules with carboxylic acid groups for OLED applications, Synthetic Metals, 161 (21-22), 2397-2404 (2011).

M. Kurt, S. Okur, S. Demic, J. Karpagamd and N. Sundaraganesan, Synthesis and Raman spectroscopic investigation of a new self-assembly monolayermaterial 4-[N-phenyl-N-(3-methylphenyl)-amino]-benzoic acid for organic light-emitting devices, Journal of Raman Spectroscopy, 42, 1682–1689, (2011).

S. Koyuncu, O. Usluer,  M. Can, S. Demic, S. Icli, and N. S. Sariciftci, Electrochromic and electroluminescent devices based on a novel fluorene-carbazole-2,5-bis(2-thienyl)-1H-pyrrole hybrid dendron, Journal of Materials Chemistry, 21, 2684–2693, (2011).

O. Usluer,  S. Koyuncu, S. Demic, and R.A.J. Janssen, A Novel High-Contrast Ratio Electrochromic Material from Spiro[cyclododecane-1,9’-fluorene]bicarbazole, Journal of Polymer Science B: Polymer Physics, 49 (5), 333–341, (2011).

O. H. Birel, H. Dincalp, C. Zafer, S. Demic, K. Colladet, D. Vanderzande, Y. Yürüm and S. Icli, Synthesis and Spectroscopic Properties of a Novel Perylenediimide Derivative, Journal of Chemical Society of Pakistan, Vol. 33 (23), 403-411, 2011.

S. Sahoo, M. Ö. Seydibeyoğlu, A. K. Mohanty, and M. Misra, “Characterization of industrial lignins for their utilization in future value added applications”, Biomass and Bioenergy, 35, 4230-4237, 2011.

M..Ö.Seydibeyoğlu, “Excellent adhesion of carbon fibers to polyurethane matrix and substantial improvement of the mechanical properties of polyurethane”, Gazi University Journal of Science, 24, 501-506, 2011

Investigation of Wear Behavior of HVOF Sprayed WC-Co Coatings for Automotive Parts in Different Working Conditions", A. UZUN, E. ALTUNCU, F. USTEL, A. TURK, S. OZTURK, International Journal of Surface Science and Engineering, 5, No:2/3, 180-192, (2011)


Konferans Makaleleri

Electronic properties of CVD Graphene capped with p and n-type doped amorphous silicon, H Arezki, M Boutchich, D Alamarguy, F Gunes, A Madouri, J Alvarez, ..., 26th International Conference on Amorphous and nanocrystallineSemiconductors (ICANS 26), 2015

Work function engineering of doped Trilayer graphene grown on 4H-SiC (0001), H Arezki, M Boutchich, JP Kleider, J Alvarez, D Alamarguy, F Gunes, ..., ANM2015, 6th International Conference on Advanced Nanomaterials, 2015

Metehan Atagür, Tuğçe Uysalman, Hilal Kara, Ece Yakkan, M. Özgür Seydibeyoğlu, Uğur Malayoğlu, “Productıon And Characterızatıon Of TPU Nanocomposıtes Reınforced Wıth Clay Mınerals Whıch Have Dıfferent Mıcrostructures”, IV th Internatıonal Polymerıc Composıtes Symposıum, Exhıbıtıon And Brokerage Event, 7-9 Mayıs 2015

Tuğçe Uysalman,Ece Yakkan, Metehan Atagür, Hilal Kara, Altan Yıldırım,Burcu Girginer, M. Özgür Seydibeyoğlu, Kutlay Sever, ” The Effect Of Two Dıfferent Couplıng Agents On Thermal And Mechanıcal Propertıes Of Lıgnın Reınforced Polypropylene / Composıtes”, IV th Internatıonal Polymerıc Composıtes Symposıum, Exhıbıtıon And Brokerage Event, 7-9 Mayıs 2015

Ece Yakkan, Tuğçe Uysalman, Metehan Atagür, Hilal Kara, Altan Yıldırım,Burcu Girginer, M. Özgür Seydibeyoğlu, Kutlay Sever, ” Interfacıal Adhesıon And Mechanıcal Propertıes Of Nanocellulose–Polypropylene Composıtes Reınforced MAPP And Fusabond®E265”, IV th Internatıonal Polymerıc Composıtes Symposıum, Exhıbıtıon And Brokerage Event, 7-9 Mayıs 2015

Y. Seki, A. Ç. Kılıç, M. Atagür, O. Özdemir, İ. Şen, K. Sever, Ö. Seydibeyoğlu, M. Sarikanat, N. Küçükdoğan, “Evaluation of Vine Stem Waste as a Filler Material for High Density Polyethylene”, ICCM 2015, International Conference on Composite Materials, 6-7 Ağustos 2015

K. Bilgin, T. Dikici, M. Erol “Characterization and photocatalysis applications of UV-visible Region of doped TiO2 nanotube arrays fabricated on pure titanium metal substrates by the anodic oxidation process” International Nanoscience and Nanotechnology for Next Generation  (NanoNG 2015 29-31 October, 2015 Antalya, Turkey

E. Yalcin, S. Demic, A. Erdoğan, O. Mermer, M. Kus, A. N. Ozcivan M. Can, “Increase Efficiency of Organic Light-Emitting Diode by Using Different Acceptor Self-Assemble Monolayers”, 1st International Conference on Green Chemistry and Sustainable Technologies (GCSTI-2015), September 30-October 03, 2015 Cesme, Izmir-TURKEY.

A. Erdoğan, C. Karakaya, M. K. Gonce, S. Buyukcelebi, A. N. Ozcivan, M. Can, M. Kus, S. Demic, “Surface Modification of CdSeS Nanocrystals for Polymer Hybrid Solar Cells”, 3rd Turkish Solar Electricity Conference and Exhibition (SolarTR-3), 27-29 April 2015, METU Convention Center, Ankara, TURKEY.

1st International Conference on Organic Electronic Material Technologies (OEMT'2015) /25-28 March 2015, Elazığ-Turkey "Improvement of device performance of organic light emitting diodes via ITO surface modification using different SAM molecules"Ahmet Nuri Özcivan, Ömer Mermer, Eyüp Yalçın, Koray Kara, Mahmut Kuş, Cem Tozlu and Mustafa Can

1 st International Conference on Green Chemistry and Sustainable Technologies. September 30-October 3, 2015 İzmir-Turkey."An OLED application with Carbozole and Triphenyl based SAM used for HTL“ Ahmet Nuri Özcivan, Eyüp Yalçın, Ayşenur Erdoğan and Mahmut Kuş

Yılmaz Atay H. (2015) Use of glass fibres to improve mechanical properties of mineral reinforced flame retardant cable trays. International Symposium on Innovative Technologies in Engineering and Science (ISITES2015) 3-5 June 2015, Valencia, İspanya

Yılmaz Atay H. (2015). Use of Nano-sized Minerals for Radar Absorbing Applications; Barium Hexaferrite Powders .NANOTR-11 Nanoscience and Nanotechnology Conference 22-25 June 2015, Ankara, Turkey

Yılmaz Atay H. (2015). Antibacterial Surface Treatments Applied to Wooden Materials with Nano Ag Particles and TiO2. 23rd International Conference on Materials and Technology (23. ICM&T). 27-30 September 2015, Portoroz, Slovenia.

Yılmaz Atay H. (2015).  Multifunctional material production for military aircrafts; radar absorbing and flame retardant composites. III. Syposium of Aegean Composite Materials 05-07 November 2015, Kuşadası, Turkey

Yılmaz Atay H., Çırak  M., Kartal G. (2015).  Grain characterisation of huntite and hydromagnesite; grain shape and roughness, identifying contact angle for determining wettability and floating property. Minerals and Metals Production from Mine to Market Conference. 15-16 December 2015. Camridge, UK.

Sutcu M., Turkan U. Investigation of mullite formation parameters using experimental design. IX. Uluslararası Katılımlı Seramik Kongresi (26-28 Kasım 2015) Afyonkarahisar (Sözlü Sunum).

Yalamaç E., Konyalı R., Sütçü M. Evaluation of grinding parameters of bayer-processed alumina powder by experimental design. International Porous and Powder Materials Symposium and Exhibition (PPM 2015) (15−18 September 2015) Cesme, Izmir, Turkey (Oral presentation) ISBN 978-975-6590-07-2, p: 111–114.

Erdoğan G., Sütçü M., Türkan U. Utilization of eggshell waste as calcium source in the production of porous anorthite ceramics. International Porous and Powder Materials Symposium and Exhibition (PPM 2015) (15−18 September 2015) Cesme, Izmir, Turkey (Oral presentation).

Alptekin H., Arkan E., Özbek C., Can M., Farzaneh A., Sütçü M., Okur S., Sağlam B. Investigation of tunable wetting properties of modified natural mineral powders. International Porous and Powder Materials Symposium and Exhibition (PPM 2015) (15−18 September 2015) Cesme, Izmir, Turkey (Oral presentation).

Ozturk S., Sutcu M., Yalamac E., Gencel O. An experimental design for the optimization of manufacturing process of porous bricks from olive mill waste. International Porous and Powder Materials Symposium and Exhibition (PPM 2015) Cesme, Izmir, Turkey (Poster presentation) ISBN 978-975-6590-07-2, p: 273–277.

Küçükdoğan Öztürk N., Sever K., Sütçü M., Sarıkanat M., Seki Y. Pirina atığı katkılı termoplastik kompozitlerin termo-kinetik (gelimat) mikser ile üretimi. XIX. Ulusal Mekanik Kongresi (2015) KTÜ, Trabzon.

Küçükdoğan Öztürk N., Sever K., Sütçü M., Seki Y., Seydibeyoğlu Ö., Sarıkanat M., Tarımsal atık ile katkılanmış yüksek yoğunluklu polietilen kompozitlerin fiziksel, mekanik ve termal özelliklerinin belirlenmesi. XIX. Ulusal Mekanik Kongresi (2015) KTÜ, Trabzon.

Küçükdoğan Öztürk N., Öztürk S., Sütçü M., Sever K. Fındıkkabuğu ve evsel çay atığı katkılı yüksek yoğunluklu polietilen kompozitlerin fiziksel ve mekaniksel özelliklerinin belirlenmesi. XIX. Ulusal Mekanik Kongresi (2015) KTÜ, Trabzon.

Dal S., Sütçü M., Gök M.S., Gençel O. Investigation of the properties of vermiculite based bricks produced using a clay binder. International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 2016, Nevsehir,

Dal S., Sütçü M., Gök M.S., Gençel O. Effect of binder clay additions on the sintering properties of fireclay refractory bricks. International Conference on Material Science and Technology in Cappadocia (IMSTEC’16),2016, Nevsehir,

Dal S., Sütçü M., Gençel O., Gök M.S. Effect of vermiculite powder addition on the sintering properties of fireclay refractory bricks. International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevsehir,

Yalamaç E., Ergani E.S., Sütçü M. Effect of sintering parameters on the mechanical properties of yttria-stabilized zirconia ceramics. International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), 6-8 April 2016, Nevsehir, Turkey

Başa Dön